EZ Drive 300™
EZ-Drive 300 is a synthetic thermoplastic resin that is specifically designed to increase installation efficiency by serving as an ergonomic assembly aid. It is used to reduce installation torques on thread forming fasteners such as Trilobular*, Taptite*, Taptite II*, and Taptite 2000* and others in turn reducing worker fatigue while increasing productivity.
Description:
- EZ-Drive 300 is a factory pre-applied product that stays in place, is dry to the touch and is unaffected by exposure to lubricants, dust, and normal shipping conditions.
Applications:
- EZ-Drive 300 reduces factory assembly torque used in automotive door, steering column, seat and seat belt assemblies, as well as large household appliances, offroad, farm and construction equipment.
| Specifications: | |
|---|---|
| Primary usage | Reduces installation torques on thread forming fasteners |
| Installation torque reduction | 75% |
| Melting point | +194°F (+90°C) |
| Flash Point | +450°F (+232°C) |
| Dry to Touch | -40°F to + 100°F (-40°C to +38°C) |
| Temperature range | -65°F to + 212°F (-54°C to +100°C) |
| Odor | No sour smell |
Features:
Increases Productivity: EZ-Drive 300 reduces friction by as much as 75% of the usual effort needed to assemble the fastener. This inturn reduces operator fatigue and injuries.
Long Shelf Life: Fasteners coated with EZ-Drive 300 are stable and exhibit a virtually unlimited shelf life if stored in a cool and dry location at temperatures between -10°C to +35°C. Optimal storage is 25°C + 4C°.
Environmentally Safe: EZ-Drive 300 is non-toxic, nonhazardous,and does not out-gas during assembly.
- General Motors: GM9986167
- Chrysler: MS-9775
- Ford: WSS-M21P27-A4